Welcome to Moldex3D Digital Transformation 2021 Online Sessions, an online version of our event series that spans the globe welcoming transformational experts and featured speakers eager to share insights into what could be the most business-critical area of our time and learn more on enterprise digital transformation.
This online conference will dive deeper than ever before into the world of digital business in the manufacturing process, going beyond digital transformation and making real sense of transformation through business use cases, common challenges and inspirational ideas.
The event will run from 09:00 until 15:00 (CEST) on 22nd & 23rd of September with keynote presentations, and live Q&A sessions as well as enhanced virtual networking throughout on our event platform for 2021.
Agenda
Day 1 – September 22
From 9:00 – 14:00 (CEST) | Check your time
Session | Presenter | |
---|---|---|
09:10-09:35 | Digital twin technology for rubber seal manufacturing |
SKF Roy Ovink |
09:35-09:54 | Enhancing prediction accuracy via sensor technologies |
RJG, Inc. Cory Hoeppner |
09:54-10:20 | Annealing Simulation Case Study in an Automotive Application |
Dr. Schneider Automotive Polska Sp. z o.o. Przemysław Narowski |
10:20-10:40 | Life of a research lab: bonding strength into simulation |
Budapest University of Technology and Economics Dr. Kovács József Gábor Anna SZUCHÁCS |
10:40-11:05 | Anisotropic Structural Material Modeling for SMC Materials |
Hexagon Dustin Souza |
11:05-11:40 | Material Digital Twin and Material Hub Cloud Service |
Moldex3D David Hsu |
11:40-12:30 | Break |
|
12:30-12:55 | An application of the new Warpage algorithms in Moldex3D 2021 to shrinkage measurement of polyamide test plaques |
RADICI Claudio Ghilardi |
12:55-13:10 | E-Mobility – MouldTex, Friction reduction in dynamic Seal trough mould Lasering. |
ORP Mr. Anthony Dossi |
13:10-13:40 | Thermal Mold Simulation – Why is it so important? |
SimpaTec Cristoph Hinse |
13:40-14:10 | Machine Digital Twin for Smart Manufacturing |
Moldex3D Allen Peng |
Day 2 – September 23
From 9:00 – 14:00 (CEST) | Check your time
Session | Presenter | |
---|---|---|
09:05-09:35 | Annealing simulation of Mouse coffin |
BASF Jin Jing (Jimmy Jin) Zeng Yue (Helen) |
09:35-10:05 | Software ecosystems for enabling incresingly realistic simulations of fiber-reinforced components |
ANSYS Fabio Pavia |
10:05-10:32 | Procedure for the automated design of conformal cooling channels based on temperature maps and the use of discrete models |
Universidad de Jaén Cristina Martín Doñate |
10:32-10:40 | Break |
|
10:40-10:50 | Moldex3D-Catia combination to provide the “counter-deformation” model. |
m3d srl Simone Spuri SIlvestrini |
10:50-11:05 | The Coupled Process Analysis (CPA) in application with Modlex3D |
IWU Fraunhofer Institute Patrick Ackert |
11:05-11:15 | Break |
|
11:15-11:25 | The importance of capturing the Physics of the Molding process |
BIMS-SEMINARS SRL Dr. Vito Leo |
11:25-11:50 | Optimization of cascade moulding process for Pipe protector |
CAFUTA d.o.o. Tjaš Žigante Tomaž Kastelic |
11:50-12:15 | Injection Molding Simulations Set-up and Experimental Validation Using an In-mold Flow Visualization System |
DTU Guido Tosello |
12:15-12:45 | Break | |
12:45-13:15 | Data-Driven Molding Trial |
Mustermind Jonas Triebel |
13:15-13:35 | Tips for Collaborative Plastics Mold Development and Managing Molding Knowledge |
Moldex3D Venny |
Speaker
*You can contact our member Jseeica Lin at jessicalin@moldex3d.com if there are any questions.